3
• If there is any of the following situation arise, notify a qualified service technician
immediately:
◊
The power cord or plug is damaged.
◊
Liquid has been spilt on to the equipment.
◊
The equipment has been dropped and damaged.
◊
The equipment does not function normally.
•
Do not block any ventilation openings to prevent the equipment from overheat.
•
Do not leave the equipment in a non air-conditioned environment where the storage
temperature may go above 70°C (158°F), as this can cause damage to the equipment.
Maintenance
•
Gently wipe screen with a clean soft hair lens brush, or a lint-free cloth.
•
Do not apply pressure to the screen while cleaning.
•
Do not spray any liquid directly onto the screen or the casing of the terminal.
•
Chemical cleaners have been reported to cause damage on the screen of the terminal.
Warning and Attention
• The technical descriptions and specifications of the equipment are subject to change without
notice.
•
For safety reasons, wear gloves when assembling the product.
•
Risk of explosion if battery is replaced by an incorrect type.
•
Dispose of used batteries according to the instructions.
Patent
Patent pending.
CE Statement
•
A Class III equipment with an enclosure made of HB material and using a non-special
connector for the a.c./d.c. input has to have a marking stating the following: “Use only
power supplies listed in the user instructions” or “For applicable power supplies see user
instructions”. This statement shall also be in the user-instructions.
•
If product with laser module, the class of laser should be mentioned. The warning as
attachment.
