ESPRIT ESP0029, Руководство пользователя

Страница: 9 / 23

8
FUNCTIONS
“speed” key
Press this key
" ↑ "
FAST or
"
↓
"
SLOW, it can adjust the running speed of the treadmill.
“Incline” key
Press this key
"
↑
"UP
or
"
↓
"DOWN
, it can adjust the incline of the treadmill.
“speed shortcut” key
Press these keys, speed walk, jog, run, it can be chosen directly which speed you want.
The highest speed is 18km/h.
“incline shortcut” key
Press these keys, incline 3, 6, 9, it can be chosen directly which incline you want. The
highest incline is level 10.
“safety key”
key Under emergent situation, pull safety key, machine stops immediately.
Getting Started
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor shield. Ensure that the safety key
is installed, as the treadmill will not power on without it. When the power is turned on, all the
lights on the display will light for a short time.
Self-Checking
When using for the first time, it is necessary to make the machine carry on self-check:
Remove the safety key, press MODE and hold, then insert the safety key again, the machine
enters into self-checking state. During this state, pressing START/STOP can terminate the
self-checking.
Quick-Start Operation
1. Press and release the START/STOP to wake display up (if not already on). Note:
Installing the safety key will also wake up the console.
2. Press and release the START/STOP to begin belt movement, at 1.0 Km/hr, then adjust
to the desired speed using the ‘+’ or ‘-’. You may also use the rapid speed keys (walk,
jog, run, ) to adjust the speed. The speed range is from
1.0km/h to 18.0km/h.
3. To slow the treadmill down, press and hold the ‘-’ key to desired speed. You may also
press the rapid speed adjust keys: walk, jog, run.
4. In a state of running, single press START/STOP, the walking belt will gradually slow
down if the speed is above 1.5km/h, if under 1.5km/h, then it will stop immediately.
5. In the state of running, single press CLEAR will reset all number except the speed. Then
enter into manual mode.
6. To stop the tread-belt press and release the START/STOP.