ESPRIT ESP0029, Руководство пользователя

Страница: 10 / 23

9
FUNCTIONS
Incline Feature
·
Incline may be adjusted anytime after belt movement.
·
The incline range is from 0 to 10 levels.
·
Press the ‘up’ or ‘down’ to achieve desired level of effort. Three Quick access key of 3, 6
and 9 are also available to adjust the incline percent.
·
The display will indicate incline percent as adjustments are made.
·
Incline will remain in its position when display is turned off.
Pulse Grip Featur
e
The Pulse (Heart Rate) console window will display your current heart rate in beats per
minute during the workout. You must use both stainless steel sensors to display your
pulse. Pulse value displays anytime the upper display is receiving a Grip Pulse signal.
Calorie Display
Displays the cumulative calories burned at any given time during your workout.
Note: This is only a rough guide used for comparison of different exercise sessions,
which cannot be used for medical purposes.
Folding and Unfolding Treadmill
Folding
First, lift the back part of the frame board with your hand till you hear a light sound, which
means the folding system has been locked. Running board can’t be turned to the opposite
direction now.
Unfolding
Put the folded treadmill in a capacious position when you want to run.
Transport
Carefully lift the treadmill at the rear roller area, grasping the two side end caps, and roll
the treadmill away.
Programmable Operations
This treadmill offers 24 present programs (P1,P2, P3……P24, see attachment). The first
14 preset programs (P1 to P14) are only for speed; the last 10 preset programs (P14 to
P24) are a combination on speed and incline. Be careful when using the last 10 present
programs as they are designed for advanced users. Children under 16 years of age are
not recommended to use the last 10 preset programs.Each preset program has a
maximum speed level that is displayed when a desired workout is chosen. The speed that
the particular program will achieve will be displayed in the Speed window. Each program
has various speed changes throughout.
To Select a Program
·
Make sure the machine is in the stop position, single press ‘clear/set’ to enter into resetting
state. Press ‘MODE’ to choose desired program (P1,P2, …..P24), then press and release
‘START/STOP’ to begin the program with default values.
·
The speed window will now be showing the preset speed of the selected program.
·
Each program will continue 30 minutes. After every one minute program and speed can be
altered manually or automatically. 3 Seconds before the ending of program a buzzer will
sound three times, then the running belt will come to a stop.