EL155 Elliptical
9
Step 2. Console Mast Assembly
1. Use cable tie to guide the 1150m/m Computer Cable(36) through Console Mast(11) and then pull out of
the console holding plate, and Insert the console mast into main frame and secure with 6pcs of 5/16"
×
15m/m Button Head Socket Bolts (80), 6pcs of 5/16"
×
1.5T Split Washers (111), 4pcs of 5/16"
×
20
×
1.5T
Flat Washers (105) and 2pcs of 5/16"
×
23
×
1.5T Curved Washers (113) by using Combination M5 Allen
Wrench & Phillips Head Screw Driver (118).
2. Take off the cable tie which ties the 1150m/m Computer Cable (36) and plug in the connectors of the
Computer cable and the two 800m/m Handpulse W/Cable Assemblies (40) on the Console. Secure the
Console on the Console Assembly (35) with 4pcs of M5
×
10m/m Phillips Head Screws (84) by using
Combination M5 Allen Wrench & Phillips Head Screw Driver (118). Pay attention to Avoiding scratching the
cables.
3. Install the two Slide Wheel Covers (65) respectively upon the left Slide Wheel and right Slide Wheel, and
secure with 4pcs of M5
×
15m/m Phillips Head Screws (82) by using Combination M5 Allen Wrench &
Phillips Head Screw Driver (118).
