EL155 Elliptical
8
Step 1. Stabilizer Assembly
1. Install the Front Stabilizer (14) on the front stabilizer holding plate at the bottom of the main frame with the
transportation wheels facing forward and secure them with 2pcs of 3/8"
×
3" Carriage Bolts (77), 2pcs of 3/8"
×
23
×
1.5T Curved Washers (112) and 2pcs of 3/8" Cap Nuts (96) by using 13&14m/m Wrench (115).
2. Connect the Rear Rail Assembly(2) to the beam of main frame and secure with 4pcs of 3/8"
×
3/4" Button
Head Socket Bolts (81), 4pcs of 3/8"
×
2T Split Washers (110) and 4pcs of 3/8"
×
25
×
2T Flat Washers(102)
by using M6 Allen Wrench(117).
3. Connect the Pedal Arm (L) to the left Crank Arm Assembly and connect the Pedal Arm (R) to the right
Crank Arm Assembly, and secure them with 2pcs of 5/16"
×
15m/m Hex Head Bolts (74) and 2pcs of
Ø
8.5
×
26
×
2.0T Flat Washers (104) by using 12 m/m Wrench (116).
4. Install the Pedal Arm Cover (L) and (R) (61&62) respectively on the left and right Pedal Arm, and secure
them with 2pcs of M5
×
10m/m Phillips Head Screws (84) by using Combination M5 Allen Wrench & Phillips
Head Screw Driver (118). Secure the Middle Stabilizer Cover (71) on the Rear Rail Assembly with 1pc of M5
×
15m/m Phillips Head Screw (82) by using Combination M5 Allen Wrench & Phillips Head Screw Driver
(118).
