Esoteric K-05, Руководство пользователя

Страница: 30 / 92

30
Clock sync
“NO WORD!” appears on the display.
e
No clock signal is being input. Check the connection with the
external master clock generator and its power and output status.
e
If clock cannot be input, set the clock to INT. (see p. 26).
“WRD UNLCK!” appears on the display.
e
Synchronization with the signal being input might not be
possible. Check the clock sync input connector connection and
the settings of the connected equipment.
The input frequencies that this unit can accept are 44.1 kHz, 88.2
kHz, 176.4 kHz, 100 kHz, 10 MHz and 22.5792 MHz.
“PLL ERROR!” appears on the display.
e
Since an audio signal is being input that exceeds the range that
this unit's master clock can synchronize with, change the clock
setting from PLL2 to PLL1.
USB connections with a computer
Computer does not recognize this unit.
e
This unit can be connected with computers running the
following operating systems.
Windows XP 32-bit
Windows Vista 32/64-bit
Windows 7 32/64-bit
Mac OS X 10.6 (Snow Leopard)
(Mac OS X 10.6.4 or later)
Mac OS X 10.7 (Lion)
Mac OS X 10.8 (Mountain Lion)
Operation with other operating systems cannot be guaranteed.
Noise occurs.
e
Starting other applications during playback of a music file may
interrupt playback or cause noise. Do not start other applications
during playback.
e
When the unit is connected to a computer via USB hub, for
example, noise might be heard. If this occurs, connect the unit
directly to the computer.
Audio files cannot be played back.
e
Connect the computer and this unit and switch to “USB in” before
starting the music playback software and starting playback. If
you connect this unit and the computer after music playback
software has already been started, the audio data might not be
played back correctly after switching this unit's inputs to “USB in”.
e
To use HIGH SPEED mode, you must install a dedicated driver (see
pp. 22–23).
Since this unit uses a microcontroller, external noise and
other interference can cause the unit to malfunction. If this
occurs, turn the power off once, and then restart it after
waiting for about one minute.
Troubleshooting (2)