133
4.
Select the
Color Matching
setting and press
Enter
.
5.
Select the
Adjustment Level
setting and press
Enter
.
You see this screen:
6.
Press the left or right arrow buttons to select a value for the
Adjustment Level
setting.
Note:
There are six adjustment levels ranging from white to black and you can adjust each level
individually.
7.
Press the left or right arrow buttons to adjust the color tone for the
Red
,
Green
, and
Blue
settings.
8.
Press the left or right arrow buttons to adjust the
Brightness
setting.
9.
Repeat the previous three steps as necessary to adjust each adjustment level.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Adjusting RGBCMY
You can adjust the
Hue
,
Saturation
, and
Brightness
settings for R (red), G (green), B (blue), C (cyan),
M (magenta), and Y (yellow) color components.
Turn on all the projectors and select the RGBCMY setting in each projector's Extended menu so that the
color tone on the combined screen becomes entirely even.
1.
Press the
Menu
button.
Содержание 696Ui
