INSTALLATION
Before installing your wall canopy:
Please read the instruc
ti
ons carefully.
Unpack the canopy and check that all func
ti
ons are working. Ensure
that the voltage (V) and the frequency (Hz) indicated on the serial plate
match the voltage and frequency at the installa
ti
on site.
Check that the area behind the installa
ti
on surface to be drilled is clear
of any electrical cables or pipes, etc.
The stainless steel and glass surfaces of the canopy are very easily
damaged during installa
ti
on if grazed or knocked by tools. Please take
care to protect the surfaces during installation.
Protect the cooktop surface below with cardboard, or the like, to
prevent damage occurring whilst the wall canopy is being installed
above.
The manufacturer shall not be liable for failure to observe all safety
regula
ti
ons in force for the correct and normal opera
ti
on of electrical
parts.
Choose a ve
nti
ng mode:
Exac
ti
on-air mode
Recircula
ti
on mode
Venti
ng knob pos
iti
on
Extrac
ti
on-air mode: Turn
the ve
nti
ng knob here
means ven
ti
ng outside
Circula
ti
ng-air mode:
Turn the ven
ti
ng knob
here means recircula
ti
on
EN-6
