REPLACING BULB
1. Switch o
ff
the extractor hood and
isolate the extractor hood by pulling
out the mains plug or switching o
ff
the fuse.
2. Remove the grease
filte
r.
3. Replace the lamp (commercially
available
fil
ament lamps (max.40W)
or halogen lamp (max. 28W) E14
type).
4. Reconnect the power by ins
erting
the mains plug or by switching on
the fuse.
Informa
ti
on
Clean v
enti
la
ti
on fans frequently. Grease should not be allowed to
accumulate on fan or
fi
lter.
CLEANING AND MAINTENANCE
Disconnect range hood from power supply before cleaning or servicing.
1. Cleaning the surface of hood frequently. Use mild soap or detergent to
clean the hood.
2. Do not use harsh alkalis or abrasives.
3. Avoid the use of scouring powers or dishwasher compounds.
4. Grease
fil
ter may be washed using mild soap or detergent. (Heavy
grease build-up may not be cleaned easily and the
fil
ter may require
replacement)
5. Charcoal
filt
er cannot be cleaned and must be replaced regularly.
Informa
ti
on
Cleaning water must not inter into motor, control switch etc. electrical
parts.
It is recommendable to clean the metallic
fi
lter every three months by
carrying out the following instruc
ti
on:
1. Remove the metallic
fi
lter from the cooker hood and wash it in a
so
luti
on of water and neutral liquid detergent, leaving to soak.
EN-10
