2
1-GENERAL WARNINGS AND REQUIRED CONTROLS
Please read this instruction carefully before proceeding and do not perform undefined operations, use the product in
accordance with the information contained in this instruction manual and its label, otherwise the product may not operate
properly, or be injured or damaged. All operations described in this manual should only be carried out by qualified
personnel who have been approved by the competent authorities.
End users and unauthorized persons should read this instruction, comply with all safety rules that may concern them, in
any case not to interfere with the product or even to interfere, to change the setting and to try to make physical entry, to
detect malfunction or gas leak. The regulator must close the inlet valve on the front and inform the relevant gas
distribution company and the specialist. The regulator is not allowed to smoke or fire until 2 meters away.
Do not start operations without accessing and reading this instruction. If you cannot reach this instruction, there are topics
that are not understood, unknown or sure before starting any operation, or you cannot carry out the operation if you
follow the instructions written in the instructions during operation and if you are having problems, please contact us or
our representative.
For all operations in this order and during use; Use appropriate tools and methods. We ensure that products or boxes are
not dropped, thrown, shaken, overburdened, force and impacted, not crushed, no weight placed on them, no damage to
external parts and external protrusions, no heavy loads and no overturns in all processes and use.
During any operation, before, during and after all use of the product; provide to take all necessary precautions including
personal protection, take the necessary legislations, regulations, procedures in accordance with the technical standards
and rules of the gas organizations, take all necessary precautions against the risk of fire, take in the inhalation of the gas,
take the necessary legal precautions, inform and warn all the interested parties about the transactions, take precautions
against hazard combinations, take adequate precautions against possible flushing of liquids in line, prevent foreign matter
from entering the discharge hole, avoid explosion and fire-related substances such as fire, sparks and cigarette smoke due
to combustible gas and to not used.
Parts other than those supplied with the product and box that are not original and do not belong to my company should
not be used. Contact us to supply spare parts. All necessary actions and precautions should be taken in consideration that
they may be exposed to natural phenomena as Product earthquake, flood etc.. At the end of its life, products must be
replaced with new ones.
Do not attempt to remove the product shut-off bracket and product bracket from the ground, allow mechanical damage
to be exposed, move to the right or to the left unnecessarily, and do not overstress during any stage and use in this manual.
Keep this instruction in a safe area after all operations. Failure, damage, accident etc. due to failure to follow the rules and
information in this instruction The manufacturer is not responsible for these situations. Do not exceed the technical limits
in this instruction.
2-OPERATION-TERMS OF USE AND TECHNICAL SPECIFICATIONS:
The gas pressure regulator helps the subsequent devices in the gas line to operate safely. The gas pressure regulator
maintains the outlet pressure within the tolerance range by lowering the inlet pressure to the desired / adjusted outlet
pressure and automatically detects the outlet pressure in the event that the outlet pressure does not reach undesirable
levels on the safety regulator, or automatically detects this situation, Has a high and low pressure gas safety shut-off device
Содержание ERG-SR
Страница 11: ...11 Figure 2 Figure 4...
