ESI
MAYA44e
12
Instrument and Microphone Inputs
MAYA44e has a built in professional
microphone preamp with +48V phantom
power support. You can connect a
dynamic microphone as well as a
condenser microphone to the top input.
INPUT 1/2
has to be switched to accept
microphone signals in the Control Panel
(see chapter 6 of this manual). If you use
a condenser microphone, you need to
48V in the Control Panel as
well. Please make sure to use a fully
balanced XLR to TRS microphone
cable.
In addition, MAYA44e has a Hi-Z instrument input that can be used for a direct connection to an
electric guitar.
INPUT 3/4
has to be switched to accept guitar signals in Control Panel (see chapter 6
of this manual). Note that the input signal will be mono only.
Line and Headphone Outputs
The MAYA44e stereo line outputs
(
OUTPUT 1/2
and
OUTPUT 3/4
)
can be connected to external devices
with line input such as multi track
recorders, a HiFi stereo system,
active monitoring speakers, a power
amplifier or analog mixing consoles.
As the two stereo output pairs are
totally independent, they can be
connected to different channel of a
mixer or to different devices
altogether and different audio signals
can be sent out to them
simultaneously. This is especially
nice in situations where you need
two independent stereo signals, for
example in a DJ setup for the main
and pre-listen signal.
In addition, both stereo line outputs
can be enabled used as headphone
outputs.
