ESI ivx e-class series, Руководство администратора

Страница: 7 / 36

IVX E-Class Administrator’s Manual Administrator programming: An introduction
A.3
Programming basics
As mentioned earlier, you may program from any ESI 48-Key Digital Feature Phone or 24-Key Digital
Feature Phone in the system. Here’s how:
1. Press PROGRAM . The normal station programming menu prompt will begin to play. Press HOLD
to stop the prompt.
2. Enter the Administrator password
1
, followed by # . You are now in programming mode (during this
time, the extension will be automatically placed in DND).
3. Follow the system programming menu to program as you wish; and, when finished, hang up.
Note: The system will automatically exit programming mode after 10 minutes of inactivity.
Example: If your Administrator password is 864 , enter programming mode by pressing
PROGRAM HOLD 8 6 4 #
(To
exit programming mode, hang up.)
System programming overview
Once you’ve accessed programming mode on an appropriate ESI Feature Phone, the system will
prompt for — and confirm — each keystroke action via voice commands and the display. You program
both configuration data and recordings in the same manner.
Important: During programming, the 24-Key Feature Phone’s two-line display shares the same content with
the top two lines of the 48-Key Feature Phone’s three-line display. Therefore, to save space, this
manual’s sample displays show only two lines.
Don’t program using a 12 -Key Feature Phone; its single-line display cannot show some informa-
tion you’ll need during programming.
The following menu shows Administrator programming functions available on the IVX E-Class system:
1 System parameters
13 Administrator password
14 System clock
Set time/date
Automatic time setting
17 System speed dial
3 Extension programming
32 Extension feature authorization
37 RFID programming
2
371 Access schedules
372 RFID tag programming
373 View RFID tag numbers
374 IPM parameters
5 Voice mail programming
53 Guest/info mailboxes
54 Group mailboxes
55 Message notification options
551 Station delivery options
552 Delivery/paging parameters
56 Cascade paging mailboxes
57 Q & A mailboxes
6 Recording
61 Record system prompts
62 Record directory names
63 MOH programming
631 MOH source
632 Record MOH
633 MOH volume
7 Reports
73 ACD department report
74 Voice mail statistics report
75 System speed-dial list
1
Default is 4 5 6 .
2
Valid only if your ESI phone system has IVX Presence Management. If administering such a system, refer to the IVX Presence
Management Administrator’s Manual (ESI part # 0450-0795).