ESI Artesia Pro XJam Скачать руководство пользователя страница 38

Страница: 38 / 40

10 Support And More Info

www.esi-audio.com/support (International)

or www.artesia-pro.com/contact-us (North America)

11 General Information

Trademarks

Xjam is a trademark of ESI Audiotechnik GmbH and Artesia Pro Inc.

Windows is a trademark of Microsoft Corporation, registered in the U.S. and other

countries.

Apple, iPad and Mac OS X are trademarks or service marks of Apple Inc., registered
in the U.S. and other countries.

Other product and brand names are trademarks or registered trademarks of their

respective companies.

The FCC and CE Regulation Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may
cause undesired operation. Caution: Any changes or modifications in construction

of this device with are not expressly approved by the party responsible for

compliance, could void the user's authority to operate equipment.

Note: This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

Page of

Artesia Pro Inc

PO Box 2908

La Mesa, CA 91943, USA

Phone: +1 619 244-0006

Email: [email protected]

ESI Audiotechnik GmbH

Mollenbachstr. 14

71229 Leonberg, Germany

Phone: +49 (0)71252 398880

Email: [email protected]

Содержание Artesia Pro XJam









































Результаты поиска

Содержание Artesia Pro XJam

Отзывы:

Похожие инструкции для Artesia Pro XJam

Бренды по названию

Популярные бренды

ESI Artesia Pro XJam, Руководство пользователя

Результаты поиска

Содержание Artesia Pro XJam

Отзывы:

Похожие инструкции для Artesia Pro XJam

Бренды по названию

Популярные бренды