Introduction
MANUAL - ES700B
Rev November 2019
Copyright © 2019 Equipment Source Inc.
Page 3 of 30
1
Introduction
WARNING
Read and understand this manual before attempting to operate this machine.
1.1
General Description
The ES700B is an indirect oil-fired forced-air heater with a maximum firing rate of approximately
770,000 BTUs/hour. The heater is intended for outdoor use and can be mounted on a trailer or skid
mounted for jobsite portability. The heater has an integral 240-gallon [910 L] fuel storage tank with
secondary containment. The heater is designed to operate reliably at extremely low temperatures and
has been proven on Alaska’s North Slope oil fields. Large doors on all sides of the heater allow easy and
safe service access in industrial environments. All heat exchanger surfaces are constructed from ANSI
309S stainless steel for extended life.
1.2
Manual Applicability
This manual is applicable to the following Equipment Source Incorporated (ESI) machine models:
Model
ESI No.
Description
ES700B
101160-01
Standard Heater
This manual should be kept with the machine at all times. Immediately contact Equipment Source
Incorporated (manufacture) or an authorize dealer to obtain a copy of this manual if missing or
damaged. Refer to www.equipmentsourceinc.com for current contact information.
1.3
Manual Scope
This manual contains basic operating and maintenance instructions for the above listed heater products.
Specific information concerning trailers, skid frames or other transport provisions are not included in
this manual. Refer to the manual provided with the transport accessory. For detailed service instructions
concerning specific electrical or mechanical components, refer to the operation and maintenance
manual provided by the manufacture of the component or contact an authorized service provider.
