Hardware Installation
2.1 CAN-PCI/400-4 Version with 4 CAN Interfaces
Figure 3:
View of CAN-PCI/400-4 with ribbon cable
In the CAN-PCI/400-4 version, the board comes with four CAN interfaces.
This module type uses two additional CAN transcievers. The physical layer of the additional CAN
interfaces is placed on a separate adapter board. The adapter board has to be mounted close to
the CAN-PCI/400. Furthermore, it has to be connected via the ribbon cable that is contained in the
scope of delivery.
The two additional physical interfaces are designed identical to the physical interfaces of CAN0
and CAN1.
Page 12 of 29
Hardware Manual • Doc. No.: C.2048.21 / Rev. 1.1
CAN-PCI/400
