Escient FireBall SE-80, Руководство для стартапов

Страница: 134 / 294

FireBall SE Advanced Users Guide WD049-1-1
9/23/2005
Page 37 of 46
6640 Intech Blvd. Suite 250 Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
Keyboard Programming
A wireless keyboard is available as on optional accessory for use with the FireBall SE. The
keyboard can be programmed to operate one FireBall product and three other devices.
Only the FireBall source button (the one with the swoop) can be programmed to operate
the FireBall. The three source buttons on the remote labeled TV, RCV, and DVD can be
programmed to operate other devices.
Programming the Keyboard to Control FB1, FB2, FB3, or FB4 Sources
Swoop
Button
The FireBall (swoop) source button is preprogrammed at the factory to correspond to the FB1
button on the remote. The FireBall source button can be programmed to correspond to any of
the FB source buttons.
Follow these steps to program the keyboard to control any of the 4 FB IR code banks:
1. Press Swoop
2. Press & Hold the “Set” button on the keyboard until the LED flashes twice.
3. Slowly enter “997” using the number buttons on the keyboard. The LED will flash twice
again.
4. Press the “CH-” button on the left side of the keyboard. The LED will flash four times.