Escient FireBall MP-200, Руководство пользователя

Страница: 110 / 263

FIREBALL REMOTE CONTROL GUIDE WD049-1-2
12/9/2005
6640 Intech Blvd. Suite 250 Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
FireBall Venture Wireless IR Keyboard
The Venture IR keyboard with universal remote control capabilities is included with most high
end FireBall products and is available as an add on accessory. The keyboard can be
programmed to operate one FireBall and three other devices.
Only the FireBall source button (the one with the swoop) can be programmed to operate
the FireBall. The three source buttons on the remote labeled TV, RCV, and DVD can be
programmed to operate other devices.
Programming the Keyboard to Control FB1, FB2, FB3, or FB4 Sources
Swoop
Button
The FireBall (swoop) source button is preprogrammed at the factory to correspond to the FB1
button on the remote. The FireBall source button can be programmed to correspond to any of
the FB source buttons using the following method:
ƒ
Press Swoop
ƒ Press & Hold the “Set” button on the keyboard until the LED flashes twice.
ƒ Slowly enter “997” using the number buttons on the keyboard. The LED will flash twice
again.
ƒ
Press the “CH-” button on the left side of the keyboard. The LED will flash four times.
ƒ Press the Fireball (swoop) source button.
ƒ
Press & Hold the “Set” button on the keyboard until the LED flashes twice.
ƒ
Slowly enter: