2.
HOW TO WEIGH:
1. Use foot to tap on the middle of the weighing platform.
2. LCD shows a moving ‘8’, then ‘0,0’.
3. Now step on the plastic platform and stand still.
4. Your weight reading is shown in about 3 seconds then locked.
5. You can now step off the scale. The display will hold your weight reading
for about 5 seconds
6. The scale then turns off automatically in about 8 seconds.
TURNING OFF YOUR SCALE:
The scale turns off automatically in about 8 seconds.
CHANGING THE WEIGHING MODE:
You can simply change the weighing mode on the back side of the scale.
DO NOT PLACE OVERWEIGHT ITEMS ON THE SCALE:
Weighing items over the maximum weight capacity will cause an overload ‘Err’
error to display. Immediately remove overweight items to avoid causing damage
to your scale.
BATTERY REPLACEMENT:
Replace the batteries when the LCD display shows the low battery ‘LO’ symbol.
INITIAL SETUP :
1. Remove the insulating plastic strip from the batteries
and ensure the +/- terminals are correctly placed as
shown inside the battery compartment. This scale
operates on 2-CR2032 lithium batteries (included).
2. Select desired unit mode (Kg or Lb) with slide switch
on bottom of scale.
3. Switch scale on by pressing key.
