11
EScale Grob G103C - Instruction Manual
29. Insert the servo through the hole in the top of
the fi n.
Depending on the servo you use, you may
have to use a rotary tool to make enough
room for the servo to fi t in.
30. Guide the servo into position using the servo
wire.
Guide the pushrod down and back up through
the round hole as shown.
31. Carefully align the servo and use normal
servo screws to secure the servo in place.
As shown, you can gently squeeze the sides
of the fi n to hold the servo in place while
putting in the screws..
32. The servo is now neatly installed and can be
removed or replaced if required.
