15
Tape
Raise Backboard to 10 FT. regulation playing
height. Measure from top of rim straight down
to the playing surface.
Using tape - mark the
side
of the steel actuator
(#16) just under the plastic actuator sleeve
(#15) at this 10 ft rim height. See
Figure 14
.
Lower backboard all the way down. Do not force
actuator once backboard is in it's lowest position.
See
Figure 15
.
Set at 10 feet
Lowered all
the way down
19.
20.
21.
23.
Remove the adhesive backing from the Height Decal (#17).
Next, carefully align and stick decal to backside of steel
actuator (#16) starting at the
10 ft mark first
. Be sure to
keep the height decal straight and rub out all air bubbles.
See
Figure 16
.
Mark with
tape
17
16
Tape at 10
feet
15
Figure 15
Figure 14
Figure 16
Do not
remove adhesive backing from height decal
(#17) yet. Carefully place height decal on backside of
steel actuator (#16) and line up the 10 ft mark on the
tape with the 10 ft mark on the height decal. Decal
should fit correctly onto the backside of the steel actuator.
( If not , simply trim to fit the top of the actuator decal).
22.
13
Содержание GOALRILLA B5000
Страница 2: ...2 ...
