ESCALADE Goalrilla B2800W-2EF, Руководство пользователя

Страница: 10 / 16

Insert a bolt through the holes in (#24) each
side of the tower followed by one nut (#25)
and tighten until secure using a Wrench. 1/2”
Net tabs will go on each bolt as shown, (#24)
add a locknut and tighten to secure (#25)
each net tab. ! DO NOT CRUSH GROMMETS
Insert bolt through the middle hole of one (#24)
the tower followed by one nut and tighten (#25)
until secure . using a Wrench 1/2”
Both Net tabs will go on the bolt as shown, (#24)
add a locknut and tighten to secure the net (#25)
tabs. ! DO NOT CRUSH GROMMETS
5/16-18 LOCKNUT
2B-6009-02
QTY. 4
24
25
25
Net Tab
5/16-18 X 1 1/4" ( ) BOLT ZINC
1B-7168-00
QTY. 2
HARDWARE NEEDED ACTUAL SIZE ( )
NOTE: If nets sit too high or low, the other
configuration above may be used. Using the
one bolt configuration will raise the net, using
the two bolt configuration will lower it.
NOTE FT : 72 If you have a (72”backboard)
continue with “ ”, on any other Step for 72 FT
unit skip to step “ ”. FT FT 54 & 60
NOTE: If nets sit too high or low, the other
configuration below may be used. Using the
one bolt configuration will raise the net, using
the two bolt configuration will lower it.
Net Tab
25
25
24
24
25
Continue to next page for the remainder
of the assembly.
STEP for FT72
STEP for FT FT 54 & 60
Continue to next page for the remainder
of the assembly.
Net
Tab
Net
Tab
10