ESBE T4, Руководство по установке и пусконаладке, Страница: 7 / 8

7
Our other UFH products:
Single-loop Pump Pack
The single-loop assembly is designed to connect
to new and existing heating systems with 15mm
compression connections for the flow and return.
The temperature switch supplies power to the pump
and will remain open until the existing heating
system water is above 40°c. Following this, the
switch will close activating the 'A' rated pump, which
will allow the TMV to mix flow and return to the
required UFH temperature. Unit is suitable for use
with floor areas of 60–90sqm or max output of 5kW.
Heat Pump Pack
The heat pump model is a pre-assembled unit that
is designed to be connected (via ball valves) to the
manifold. The unit is for use in applications where
water temperature controls are not required.
This is typically seen where heat pumps or low
temperature systems are utilised.
The unit includes an ‘A’ rated energy efficient pump
and is suitable for use with floor areas up to 250sqm
or a maximum output of 20kW. Primary flow and
return connections can be made from the side or
the bottom of the unit. This can also be mounted on
either the left- or right-hand side of the manifold.
7