5 (32)
www.esbe.eu
COMMISSIONING ACTUATOR:
During commisioning it might be useful to turn the valve manualy by pulling the
knob, picture A. Reset to operation mode by pushing and adjusting the knob back,
picture B.
1
COMMISSIONING IF USING LARGER SYSTEMS/CENTRAL REGULATING
Please read each product´s instruction manual.
COMMISSIONING FIXED TEMPERATURE OPERATION
To set the mixed water temperature, see recommendations in the table below.
All temperature settings must be measured at suitable location with a
thermometer to have the correct mixing temperature of the valve.
20 - 55°C
25°C
35°C
40°C
46°C
52°C
58°C
The temperatures are only a reference and might be different under certain conditions.
However the range will be kept.
HOW TO USE THE INFORMATION LEAFLET
The Circulation Unit is equipt with an information display containing a leaflet that
graphically explains what kind of application the unit is controlling. It gives you also
the possibility to write in notes and leave your business card behind.
Just remove the display glass and select the suitable information.
MAINTENANCE
The circulation unit does not require any specific maintenance under normal
conditions. Althoug it is important to annually check the entire system. Pay
specially attention to all threaded or soldered connections and the potential
occurrence of limestone sedimentation.
WARNING
Switch off the electric supply before any operation. Pay attention to
the hot water contained.
SPARE PARTS
Spare parts are ordered via ESBE customer service.
In order to avoid queries and incorrect orders, all data on the name plate should
be submitted for each order.
GX
X X00
