esatto.house
11
4
EN
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Bracket
Hook
Extensible tube
Inside
Bracket
Outside
Safety
screws
4
EN
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Bracket
Hook
Extensible tube
Inside
Bracket
Outside
Safety
screws
4
EN
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Bracket
Hook
Extensible tube
Inside
Bracket
Outside
Safety
screws
4
EN
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Bracket
Hook
Extensible tube
Inside
Bracket
Outside
Safety
screws
WALL MOUNTING INSTALLATION
Prepare for installation
1. If you have an outlet to the
outside, your rangehood
can be connected as below
picture by means of an
extraction duct (enamel,
aluminum, flexible pipe or
inflammable material with an
interior diameter of 150mm)
2. Before installation, ensure
that turn the unit
off and unplugged from the outlet.
3. The rangehood should adhere to the minimum
and maximum distances from the rangehood
base to the cooktop surface (as per the Position
the Rangehood section on page 8).
4. Install the wall bracket hook in a suitable place.
Once the installation height is fixed and level, the
fixed position of the inside chimney bracket is
the place of chimney. (Figure 4)
5. Fix the outside chimney bracket on the outside
chimney, and be sure that the inside chimney can
be adjusted the height in it freely as well as fixing
the extensible pipe. Next, install the extensible
pipe and chimney on the rangehood. (Figure 5)
6. Lift up the rangehood and hang onto the wall
bracket hook. (Figure 6)
7. Adjust the height of the inside chimney to the
position of the inside chimney bracket and fix on
it by screw, after adjusting the position, fix the
body to the wall with the safety screws to secure
it. (Figure 7)
8. Fix the one-way-valve to the air outlet of the
rangehood. Then attached the exhaust pipe onto
the one-way-valve as shown below.
Wall bracket hook
Expandable pipe
Bracket
Outside
chimney
Safety
screws
Inside
chimney
Figure 4
Figure 5
Figure 6
Figure 7
Rangehood
Pipe
