esatto.house
31
Error Codes
If there is a malfunction the dishwasher will display error codes to identify the fault.
Code Indicator
Meanings
Possible Causes
E1 will be displayed
on the LED display
and the buzzer will
sound.
Water entering the dishwash-
er has exceeded the pre-set
time, or the flow of water into
the dishwasher is restricted.
Ensure that the water supply hose is un-kinked and that the
water supply tap is fully open.
E3 will be displayed
on the LED display
and the buzzer will
sound.
The dishwashers on board
sensors have detected that
the water isn't reaching the
desired temperature within
the pre-set time.
Potential malfunction of the heating element. Try turning the
appliance power off at the power point for 15 minutes before
re-starting.
Also ensure the filter system is clean and free of foreign
objects (such as broken glass).
Check the drain hose isn’t kinked or blocked.
If issue persists, please contact our Customer Care team.
E4 will be displayed
on the LED display
and the buzzer will
sound.
Overflow. The onboard
computer has detected a leak
(correctly or incorrectly).
Check that your dishwasher is level, an un-level dishwasher
can trigger this alarm.
If the problem persists Contact our Customer Care team.
E6 will be displayed
on the LED display
and the buzzer will
sound.
Potential component failure.
Try turning the appliance power off at the power point for 15
minutes before re-starting.
If issue persists, please contact our Customer Care team.
E7 will be displayed
on the LED display
and the buzzer will
sound.
Potential component failure.
Try turning the appliance power off at the power point for 15
minutes before re-starting. If issue persists, please contact
our Customer Care team.
WARNING!
If the E4 Overflow error is occurring, turn off the main water supply at the tap as a pre-caution, before
calling our Customer Care team.
Note
. If there is water in the base of the dishwasher because of an overfill or small leak, the water should be removed
before re-starting the dishwasher.
