manualshive.com logo in svg

Esaote MyLabOmega, Начало работы

Поделиться
Скачать
Esaote MyLabOmega Скачать руководство пользователя страница 50

S Y S T E M   O V E R V I E W

MyLab

  -   G E T T I N G   S T A R T E D

3 - 16

Error #3

This error indicates that one battery couldn’t be charged. The system displays
the following message:

If this situation occurs, close the exam as soon as possible by pressing 

EN D

EXAM

 and switch the system off by pressing 

O N /O FF

 and then the main switch

placed on the rear panel. Switch 

MyLab

 on again and check whether the

message is still present. If the problem persists, contact Esaote personnel.

Error #4

This error indicates that at least one of the batteries has reached the maximum
temperature allowed for its working conditions. The system displays the
following message and shuts down automatically:

Should this situation occur, contact Esaote Service.

Power Supply Error Messages

Whenever an error in the management of the power supply occurs, the
system displays a numbered error message: the number in the warning
message indicates the type of error.

Error #5

This error indicates an overheating problem of the power supply. The system
displays the following message: 

If this situation occurs, shut down the system and leave it off for a while.
Verify that there is adequate ventilation to prevent the overheating of the
device.

Should the problem persist, contact the Esaote Service department.

Error #6

This error indicates that a fan is not working. The system displays the
following message: 

Error #3: problem with battery 

charging

.

Error #4: problem with battery status. 

The automatic shut down will start in a 

few seconds.

Error #5: overheating!

Please, contact the Service department.

Error #6: problem with fan.

Please, contact the Service department.

Содержание MyLabOmega























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды