Esaote MyLabOmega, Начало работы

Страница: 33 / 118

A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y
MyLab
- G E T T I N G S T A R T E D 2 - 7
GETTI
NG STARTED
Wireless Requirements
MyLab
is equipped with built-in wireless capability.
When wireless is active, the operator should make sure to stay at a minimum
distance of 20 cm from the rear of the equipment. If it is necessary to work
at a shorter distance, temporarily switch the wireless device off.
NOTE
The wireless capability has to be considered as an intentional RF (Radio
Frequency) transmitter as indicated by the symbol:
When the wireless is active,
MyLab
might interfere with other equipment.

SS
Refer to the “Safety and Standards” manual for further information on
restrictions for the use of wireless connections.
WARNING
The system is equipped with a standard Wireless LAN RF receiver and
transmitter module that uses the following frequencies:
The system may be interfered with by other equipment, even if that other
equipment complies with CISPR emission requirements.
Receiver/Transmitter Band
[MHz]
Modulation
Maximum Transmitter Power
[dBm]
2400 to 2483.5 DSSS and OFDM 20 (WLAN standard limit)
5150 to 5350 OFDM 30 (WLAN standard limit)
5470 to 5725 OFDM 30 (WLAN standard limit)