manualshive.com logo in svg

Esaote MyLab 9, Начало работы

Поделиться
Скачать
Esaote MyLab 9 Скачать руководство пользователя страница 60

U S I N G   T H E   S Y S T E M

MyLab

  -   G E T T I N G   S T A R T E D

5 - 2

6. Connect the network and other cables from the system to the 

appropriate wall plugs.

7. Plug the cable to a reliable grounding power outlet to assure 

adequate grounding.

8. Turn the main switch of the rear panel on.

9. Press 

O N /O FF

 to turn on the system.

WARNING

When installing 

MyLab

, check that the power cable is not tightly bent, that

it can’t be squashed by a misplaced foot or by heavy objects.

WARNING

Position the system in a location allowing an easy unplug of 

MyLab

 from the

mains in case of need.

NOTE

It is recommended to turn the rear panel switch off before unplugging the

power cable, whenever the system is expected not to be used for long

periods.

NOTE

Whenever the system has to be insulated from the mains, disconnect the

cable from the power outlet.

CAUTION

Do not turn the system off while working (for example saving data) or
during the initialization phase: the hard disk could be damaged by this
operation.

CAUTION

This is a PC based system; data loss or driver damage may occur if the
system is turned off while working (for example saving data) or during the
initialization phase. Refer to the appropriate chapters of this manual for
detailed information on when and how to safely power the system off.

System Controls

System controls are located on the Control Panel Assembly that includes the
control panel, the touchscreen and the alphanumeric keyboard.

Control Panel Section

The control panel includes the main imaging controls: the TGC slide
controls, a trackball, the joystick and the exam control buttons and knobs.
The control module also allows to select imaging modes, review and annotate
images, perform measurements and calculations.

Содержание MyLab 9























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды