manualshive.com logo in svg

Esaote MyLab 9, Начало работы

Поделиться
Скачать
Esaote MyLab 9 Скачать руководство пользователя страница 46

S Y S T E M   O V E R V I E W

MyLab

  -   G E T T I N G   S T A R T E D

3 - 10

Control Panel Assembly Orientation

 The Control Panel Assembly is adjustable to accommodate a wide range of
operator heights and operating positions. 

.

These adjustments can be controlled by two levers located below the Control
Panel Assembly (as shown in the image beside).

The orientation and sliding lever (4), located on the left, allow to swivel and
slide back and forth the control panel.

Push the lever to rotate and slide the control panel into the new position.
Release the lever when the control panel is correctly positioned. This lever
allows to rotate by up to 45° clockwise and by up to 180° counterclockwise
(closed position for optimal handling).

CAUTION

When rotating the keyboard, pay attention not to damage the peripherals
placed on the console. If the peripheral falls down, injury may be caused.

The lifting lever (15), located on the right, allows to adjust the position of the
control panel vertically, lifting or lowering it.

Push the lever and act on the handle to adjust the height of the control panel.
This lever allows a vertical displacement of 

20 cm

Pull-out Qwerty Keyboard (14)

Beneath the Control Panel there is a pull-out alphanumeric keyboard. The
keyboard is mounted on a sliding drawer: just pull it to extract the keyboard.

The keyboard is used to enter patient data, comments and text annotation on
images.

Data Storage

You can store exam data onto removable media. Removable media include
USB storage devices and the DVDs and CDs. 

The DVD drive (20) is located on the right side of the control panel behind
the touchscreen. It allows both to read and to burn CDs and DVDs.

Two USB ports (19) are located on the right side of the control panel next to
the touchscreen protected by a rubber cover. These ports can be used to
connect an USB device for digital storage, an USB foot-switch or a USB
printer.

Содержание MyLab 9























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды