Esaote MyLab 9, Начало работы

Страница: 57 / 118

P R E P A R I N G T H E S Y S T E M
MyLab
- G E T T I N G S T A R T E D 4 - 9
GETTI
NG STARTED
10. Lock the monitor arm by rotating the lever on the monitor
arm on lock position.
11. Release the wheel brakes and set the steering locks for
comfortable moving.
12. Move the system using the front or rear handle.
13. Avoid any unnecessary mechanical shock to the system while
moving it.
Observe the following warnings and cautions before moving the system:
WARNING
Use the handles on the keyboard only to move the system and rotate the
keyboard.
Make sure that the probes are locked and the probe cables are properly
hanged in the cable hooks while moving the system.
WARNING
The handles on the keyboard cannot be used to lift the system.
To steadily lock the system, all the wheels must be locked.
Do not park the system on a slope.
Do not use the brakes to park the machine on a slope.
Avoid any unnecessary mechanical shock to the system while moving it.
Transportation When transporting the system in a vehicle, remember to:

Disconnect and remove all probes and peripheral devices.

Rotate the control panel in its closing position.
CAUTION
The keyboard could be damaged during transportation in a vehicle, if it is
locked.

Bring the control panel to its lowest position.

Protect the LCD screen (for example with bubble wrap) and
placed it horizontally, taking care to place something thick
(such as foam or bubble wrap) between the control panel and
the LCD itself, to avoid any contact between the parts and to
avoid screen swing during transportation.