7
42. Press
Done
after you complete the calibration. If you skip this step, the
settings may not be remembered when the system is re-booted.
Setting Date and Time
43. Select
System
Maintenance
44. Enter the System Password and press
OK.
45. Select
Set Date/Time
.
46. Confirm
Date
is selected from the menu.
47. If the Date is NOT correct, press
CLEAR
.
48. Using the Keypad enter the correct Date in the MM-DD-YY format and
press
Apply
. A message will state “Change was successfully applied.” If
you enter the date in the wrong format and press Apply this error message
will appear “
ERROR! Format: MM-DD-YY
”. Press
CLEAR
and re-enter
the Date in the correct format.
49. Select
Time
from the menu.
50. If the Time is NOT correct, press
CLEAR
.
51. Using the Keypad enter the correct Time in the HH:MM
AM or PM format and press
Apply
. A message will state
“Change was successfully applied.” If you don’t select AM or
PM, the system will automatically select AM.
52. Press
Done
to exit and return to the
System Maintenance
screen. Press
Done
again to return to the
Main Menu
screen.