ESAB Tig 4000i Aristo, Инструкция по эксплуатации

Страница: 12 / 24

-- 12 --
bt23d1ea
When carrying out TIG welding, the value for the pulse current can be changed with
the remote control.
For more information about the operation of the remote control unit, see the relevant
operating instructions for the control panel.
7 MAINTENANCE
Regular maintenance is important for safe, reliable operation.
Only those persons who have appropriate electrical knowledge (authorized
personnel) may remove the safety plates to connect or carry out service,
maintenance or repair work on welding equipment.
Note!
All guarantee undertakings from the supplier cease to apply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any
faults.
7.1 Cleaning the air filter
S
Release the cover plate with the dust
filter (1).
S
Swing out the cover plate (2).
S
Remove the dust filter (3).
S
Blow it clean with compressed air at
reduced pressure
S
Replace the filter with the finer mesh
on the side against the cover plate (2)
S
Refit the cover plate with the filter.
7.2 Topping up the coolant
We recommend a 50/50 % mixture of water and
ethylene glycol.
Top up with coolant until it is up to the level of
the filling hole.
GB