ESAB PowerCut 400, Инструкция по эксплуатации

Страница: 8 / 30

© ESAB AB 2012
- 8 -
bp28e
Dispose of electronic equipment at the recycling facility!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical and/or
electronic equipment that has reached the end of its life must be disposed of at a
recycling facility.
As the person responsible for the equipment, it is your responsibility to obtain
information on approved collection stations.
For further information contact the nearest ESAB dealer.
ESAB can provide you with all necessary cutting protection and accessories.
2 INTRODUCTION
The PowerCut 400 is a complete system for manual plasma cutting. It delivers
cutting power for severing materials up to 13 mm thickness.
2.1 Equipment
The power source is supplied with:
S
power cable, 3 m
S
instruction manual
S
return cable with clamp
S
plasma cutting torch PT-39, 4.6 m, supplied as indicated on page 28
S
wear part kit for PT-39.
3 TECHNICAL DATA
PowerCut 400
Mains voltage range 90 - 280 V , 1 ~, 50/60 Hz
Setting range, rated value 110 V: 15 – 25 A
230 V: 15 – 30 A
Permitted load
25 % duty cycle 110 V
60 % duty cycle 110 V
20 % duty cycle
230V
60 % duty cycle 230 V
25 A
19 A
30 A
18 A
Power factor at maximum current 0.99
Efficiency at maximum current 75 %
Open-circuit voltage U
0
250 V
Operating temperature - 10 to 40 °C
Transportation temperature - 20 to 55 °C
Sound pressure at no load < 43 db (A)
Nominal flow rate 189 l/min at 4.8 bar
Dimensions, l x w x h 465 x 160 x 340 mm
Weight including torch and return cable 14.5 kg
Insulation class transformer H
Enclosure class IP 23
GB