ESAB PCM-50i, Инструкция по эксплуатации, Страница: 5 / 32

SECTION 1 DESCRIPTION
5
1.1 GENERAL
The PCM-50i is a compact, completely self-contained
plasma cutting system. As shipped, the system is fully
assembled and ready to cut after being connected to
input power and a source of compressed air (90-150 psi;
6-10 bar). The PCM-50i package uses the heavy-duty
PT-27 torch to deliver cutting power for materials up to
1-1/4 inch (32 mm) thick. Refer to the following para-
graphs for descriptions of the PCM-50i packages avail-
able as well as performance specifications.
Use only torches designed for use with this Series A
console. Do NOT use or modify the PT-23, PCT-80 or
any other torch for use on this console. The series A
console uses a pneumatic interlock safety system.
The original console used an electrical safety inter-
lock system. Use of torches not designed for use
with this console could create an electrical shock
hazard.
1.2 SCOPE
The purpose of this manual is to provide the operator with
all the information required to install and operate the
PCM-50i plasma arc cutting package. Technical refer-
ence material is also provided to assist in troubleshoot-
ing the cutting package.
1.3 PACKAGES AVAILABLE
Table 1-1 lists PCM-50i packages available through your
dealer. Package contents are indented under each com-
plete system description.
Table 1-1. PCM-50i Cutting Packages
Table 1-2. PT-27 Spare Parts Kit Contents
Description Part Number Quantity
50 A Nozzle
Electrode
Swirl Baffle
Heat Shield
Standoff Guide
Valve Pin
Fuse, 15 A, 250 V, Fast Acting
33369
33366
33367
35547
21420
21619
951780
4
3
1
2
1
1
4
Description Part Number
PCM-50i, PT-27, 380/415 V, 75°, 25 ft, 1-phase
PCM-50i (Ser. A) Console w/ Regulator
PT-27 Torch, 75°, 25 ft (8 m)
PT-27 Spare Parts Kit*
Work Cable, 25 ft
34658
35786
21661
35549
680560