4
PARTS INFORMATION
All parts which can be replaced without breaking soldered or brazed joints are illustrated below or listed on the next
page. When ordering parts, please give both part number and description (including size, where appropriate).
50Z38
THUMBPIECE
DRILL AT ASSEMBLY
#52 (.0635) DRILL
PIN
6262-0009
50Z37
LATCH
62399001
PIN
51Z31
INSERT
638981
LEVER ASSEMBLY
7/8-20
33A56
NUT
01Y41 (ACET.)
MIXER ASSEMBLY
77Z29
WASHER
77Z30
WASHER
77Z29
WASHER
GUIDE - 638240
“O”RING - 638797
“O”RING - 85W10
WASHER - 638241
SPRING - 29Z37
STEM - 638930
* 77Z97
WASHER
3/8-24
(2) 54A87
STEM
ASSEM.
9/16-25
3924
SPRING
28Z43
SPRING
86W85
“O”RING
134Z55
PLUG
Fig. 1 - C-62 Torch, Part No. 02X85
ING NOZZLES. Use the OXWELD tools recommended
in the charts on page 4 or OXWELD nozzle cleaning com-
pound.
To clean the preheat slots on internal nozzles, remove
the external sleeve and use a soft bristled brush.
For longer life, nozzles should be cleaned periodically in
a solution of OXWELD nozzle cleaning compound (Part
No. 761F00) made up and used as directed on the jar in
which it is packed.
Cutting Valve Lever:
To remove, merely drive out the
fulcrum spiral-pin, using a drill or piece of rod (7/32-in.
diam. or smaller).
Cleaning Cutting Nozzles:
If the cutting nozzle does
not produce straight, uniform flames, or if any of the nozzle
orifices become clogged, clean them by hand with the
correct size twist drill shown in the table on page 4 or
with OXWELD tip cleaners. (The relationship between
OXWELD tip cleaners and drill sizes is shown on the tip
cleaner case.) DO NOT USE ORDINARY TWIST DRILLS
TO CLEAN FIN-WASHING, GOUGING OR RIVET WASH-
Содержание OXWELD C-62
Страница 7: ...7 ...
