ESAB Origo Tig 3001i, Инструкция по эксплуатации

Страница: 16 / 32

-- 16 --
bt37e
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!
3 INTRODUCTION
Tig 3001i is a TIG welding power source, which can also be used for MMA welding.
ESAB’s accessories for the product can be found on page 27 .
3.1 Equipment
Tig 3001i can be supplied with or without cooling unit.
The power source is supplied with:
S
4.5 m return cable with contact clamp
S
instruction manual for the welding power source
S
instruction manual for the control panel
S
instruction manual for the cooling unit (if applicable)
Instruction manuals in other languages can be downloaded from the website,
www.esab.com.
3.2 Control panels TA23 and TA24
The power source is supplied with one of the following control panels:
Welding process parameters are controlled via the control panel. See the separate
instruction manual for a detailed description of the panels.
GB