ESAB Origo TA23, Инструкция по эксплуатации

Страница: 3 / 12

- 3 -
bi15d1ea
1 INTRODUCTION
The manual describes the use of TA23 control panel.
For general information about operation see user's instructions for the power source.
When mains power is supplied the unit runs a self diagnosis of the
LEDs and the display, the program version is displayed and in this
example the program version is 0.18A
1.1 Control panel TA23
Knob for setting current (A) or time (s)
Display
Choice of welding method TIG or MMA
Choice of HF start or LiftArc
t
Choice of 2-stroke or 4-stroke
Setting from panel or for connecting remote control unit
Display of VRD function ( reduced open-circuit voltage ) is active or inactive.
Indication of which parameter is shown in the display (current or seconds)
Choice of setting parameter, see page 4
Indication of selected setting parameter, see page 4
GB