ESAB ORIGO Mig C280 PRO, Инструкция по эксплуатации

Страница: 6 / 32

© ESAB AB 2011
- 6 -
bc23de
Dispose of electronic equipment at the recycling facility!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical and/or
electronic equipment that has reached the end of its life must be disposed of at a
recycling facility.
As the person responsible for the equipment, it is your responsibility to obtain
information on approved collection stations.
For further information contact the nearest ESAB dealer.
ESAB can provide you with all necessary welding protection and accessories.
2 INTRODUCTION
The Mig C280 PRO and Mig C340 PRO are step controlled power sources in a
compact design, intended for welding with solid steel, stainless steel or aluminium
wire as well as cored wire with or without shielding gas.
The possibility of welding with homogeneous wire/shielding gas and welding with
gasless cored wire is obtained by switching the + and - connections on the switching
terminal above the wire feed unit.
The power sources comes in different variants, see page 25
ESAB's accessories for the product can be found on page 29 .
2.1 Equipment
The power source Mig C280 PRO is supplied with:
S
Welding gun PSF 250 - 3m ( Mig C280 PRO 4WD - 4,5m)
S
Return cable 3.5m with return clamp (Mig C280 PRO 4WD - 5m)
S
Shelf for gas cylinder
S
Instruction manual
The power source Mig C340 PRO is supplied with:
S
Welding gun PSF 305 - 3m (Mig C340 PRO 4WD - 4,5m)
S
Return cable 3.5m with return clamp (Mig C340 PRO 4WD - 5m)
S
Shelf for gas cylinder
S
Instruction manual
GB