9
2.0 - MAINTENANCE
2.5 POWER CABLE REPLACEMENT CONTD.
•
Slide outer jacket under front handle and bring front handle up to neck.
•
Replace switch and switch housing and secure with mounting screws.
STEP #6
STEP #7
•
At rear of torch, slide rear housing over outer jacket.
•
Attach Euro body to power cable.
•
Attach the gas and water lines to Euro body with new clamps.
STEP #8
EURO
BODY
WHITE CONDUIT LINE
BLUE WATER
LINE
POWER & WATER LINE
(RED WATER LINE)
REAR HOUSING
5/64" (2 mm) ALLEN
WRENCH
LINER SET SCREW
SWITCH
HOUSING
HOUSING
SCREWS
OUTER JACKET
FRONT HANDLE
GOOSENECK
•
Slide rear handle over Euro body and secure with mounting screws.
•
Install liner (see Section 2.4).
LINER
