INSTRUCTION MANUAL
F-15-450
March, 1998
Be sure this information reaches the operator.
You can get extra copies through your supplier.
These INSTRUCTIONS are for experienced operators. If you are not fully familiar with the principles of operation and safe
practices for arc welding equipment, we urge you to read our booklet, "Precautions and Safe Practices for Arc Welding, Cutting,
and Gouging," Form 52-529. Do NOT permit untrained persons to install, operate, or maintain this equipment. Do NOT attempt
to install or operate this equipment until you have read and fully understand these instructions. If you do not fully understand
these instructions, contact your supplier for further information. Be sure to read the Safety Precautions before installing or
operating this equipment.
MT-450W & MT-650W
COOL GRIP
Water-Cooled MIG Torches
Ready-to-Weld Torch Assemblies
Each of the following torches has a 45 degree gooseneck
and includes liner, contact tip and standard duty slide-on
#10 nozzle.
MT-450W, .035, 12 ft. (3.6 m) ................................... 37018
MT-450W, .035, 15 ft. (4.5 m) ................................... 37019
MT-450W, .045-1/16, 12 ft. (3.6 m) ........................... 37020
MT-450W, .045-1/16, 15 ft. (4.5 m) ........................... 37021
Basic Torches
Basic torches do not include liners, contact tips or
nozzles. Mix and match the accessories listed in appropri-
ate tables to customize a torch that is just right for your
job.
MT-450W, 12 ft. (3.6 m) ............................................ 37024
MT-450W, 15 ft. (4.5 m) ............................................ 37025
MT-650W, 12 ft. (3.6 m) ............................................ 37026
MT-650W, 15 ft. (4.5 m) ............................................ 37027
