ESAB Miggytrac 1001, Инструкция по эксплуатации

Страница: 8 / 22

-- 8 --
fhc1i1ea
3 INSTALLATION
3.1 General
The installation must be executed by a professional.
Miggytrac 1001 can be connected to most of ESAB’s feed units.
For connection to older feed units, please contact your nearest ESAB retailer.
In the case of welding at a great distance from the feed unit an intermediate wire
feed unit (MEK 25) can be connected.
Miggytrac 1001 can also be powered by other welding power sources via a
separate transformer, see page 12.
For connection of the wire feed unit to Miggytrac 1001, use control cable acc. to
Accessories, on page 15.
GB