6 MAINTENANCE
0463 279 001
- 17 -
© ESAB AB 2015
6
MAINTENANCE
NOTE!
Regular maintenance is important for safe, reliable operation.
Only those persons who have appropriate electrical knowledge (authorised personnel) may
remove the safety plates to connect or carry out service, maintenance or repair work on
welding equipment.
CAUTION!
All warranty undertakings from the supplier cease to apply if the customer
attempts any work to rectify any faults in the product during the warranty period.
6.1
Inspection and cleaning
Check regularly that the power source is free from dirt.
The power source should be regularly blown clean using dry compressed air at reduced
pressure. More frequently in dirty environments.
Otherwise the air inlet/outlet may become blocked and cause overheating. To avoid this, the
airfilter should be regularly cleaned.
Replacing and cleaning the dust filter:
1. Release the dust filter according to the figure.
2. Blow the filter clean with compressed air (reduced pressure).
3. Ensure that the filter with the finest mesh is placed towards the grille.
4. Reinstall the filter.
6.2
Welding torch
Wear parts should be cleaned and replaced at regular intervals in order to achieve
trouble-free welding.
