ESAB ESP-50, Инструкция по эксплуатации

Страница: 17 / 62

17
2.1 gENEral
The ESP-50 is a compact, completely self-contained plasma cutting system. As
shipped, the system is ready to cut after being connected to input power, a source
of compressed air (60 - 100 psi / 4.1 - 6.9 bars) and a PT-5 torch. The ESP-50 package
uses the PT-5 torch to deliver cutting power for severing materials up to 5/8 inch
(15.9 mm) thick. Refer to the following paragraphs for descriptions of the ESP-50
packages available as well as performance specifications.
2.2 SCoPE
The purpose of this manual is to provide the operator with all the information required
to install and operate the ESP-50 plasma arc cutting package. Technical reference
material is also provided to assist in troubleshooting the cutting package.
use only ESaB torches that
are designed for use with this
console. use of torches not de-
signed for use with this console
could create an ElECTrIC SHoCK
HaZarD. Do NoT use or modify
any other torch for use on this
console.
WarNINg
The ESP-50 plasma cutting package combines the ESP-50 and PT-5 torch. A typical
package includes: ESP-50 Console/Power Source, PT-5 Torch - 5' (7.6 m) or 50' (15.
m), Torch Spare Parts Kit and a power cable. See Section for installation details.
2.3 PaCKagES aVaIlaBlE
2.3.1 ESP-50 Mechanized Cutting Packages
2.4 SPECIfICaTIoNS: ESP-50
Cuts .50 in. (1.7 mm)
1 ph. Input ...................................................................08/0 vac, 1 ph, 50/60 Hz, 46/4 A
ph. Input ...................................................................08/0 vac, ph, 50/60 Hz, /0 A
....................................................................................400/460 vac, ph, 50/60 Hz, 1/11 A
Output ...........................................................................................50 amps @ 100% duty cycle
Dimensions ...................................................................................................W = 10.1” (75mm)
....................................................................................................................... H = 18.” (465mm)
....................................................................................................................... D = 0.” (576mm)
Weight ....................................................................................................................85 lbs. (8.6kg)
Minimum Air Requirements ...................... 50 cfh @ 60 psig (117.9 l/min @ 4.1 bars)
SECTIoN 2 DESCrIPTIoN