ESAB Aristo Mig U4000i, Инструкция по эксплуатации

Страница: 11 / 28

© ESAB AB 2003
- 11 -
bu20d1ea
5 OPERATION
General safety regulations for handling the equipment can be found on
page
4 . Read through before you start using the equipment!
5.1 Connections and control devices
1 Connection for cooling water from the TIG
torch - RED 10 White indicating lamp - Power supply ON
2 Connection with ELP* for cooling water to
the TIG torch - BLUE 11 Orange indicating lamp - Overheating
3 Cooling water filler 12 Connection for control cable to the wire
feed unit or to the terminating resistor
4 Connection for welding current cable (+)
at MMA welding or for return cable at TIG
welding 13 Connection for gas hose
5 Connection for remote control 14 Connection for welding current to the wire
feed unit
6 Connection for return cable (-) or for
welding current cable at TIG welding 15 Connection for cooling water to the wire
feed unit - BLUE
7 Connection for start signal from the torch. 16 Connection for cooling water from the wire
feed unit - RED
8 Connection for gas to the TIG torch 17 Fuse for supply voltage for feeder unit,
42 V
9 Main power supply switch, 0 / 1 / START
* ELP = ESAB Logic Pump, see point 5.5
GB