-- 6 --
cra1d1ea
INSTALLATION
1. Welding power source, see separate instruction manual.
2. Dimension drawing, see page 16.
3. Diagram, see page 17.
4. Connection diagram, see page 18 and page 19.
5. Tool dismantling:
It is necessary to dismantle the tool.
S
For adjustment of the ”home” position.
S
In the event of a fault.
Dismantling:
S
Remove the three bolts (1) in the support ring (2).
S
Remove the screw (4).
S
Pull off the support tube (3).
S
Carefully withdraw the entire inner assembly (5) backwards, being careful not to
damage the microswitch.
