-- 12 --
cra1d1ea
ACCESSORY SET FOR INTERNAL WELDING
Order number, see on page 5.
Fitting:
1. Dismount the support plate 01 and the support tube 02.
2. Pull of the envelope of the tool 06.
3. Slacken the welding cable clamp 07 (approx. 6 turns) and remove the screws 03 och 04.
4. Pull out the electrode holder and link arm 05 far enough to allow the welding cable to be
disconnected from the electrode holder.
5. Push back the envelope 06 and the support tube 02.
6. Connect the accessory set for internal welding 08 to the welding cable.
7. Pull the accessory set into the correct position by means of the welding cable and secure
it.
8.
TIGHTEN THE WELDING CABLE CLAMP 07 THROUGH HOLE 09 IN THE
OUTER CASING 06, OTHERWISE THE ROTATION MOTOR WILL BE DAM-
AGED!
dra1b013
