Indoor PCB
Communication cable
Sensor
Place all sensors in right positions
Sensor cable connection
73
4. Installation Walkthrough
4.5. Wiring
6) Connect the sensors and communication cables to the
indoor unit.
●
Retrieve all sensors and communication cables
from the accessories bag.
Connect all sensors to the communication cables,
and insert the male end into the indoor unit
through the cable glands.
Connect them to the female quick connectors
inside the indoor units.
Place all sensors in the correct positions.
After everything is connected, fasten the cable
glands to prevent cables from loosening.
●
●
●
●
7) Re-install the electrical box cover,
as well as the small handle on the
back of the outdoor unit, and
close the the indoor unit door.
The wiring process is then complete.
C
C
Содержание AW11-V6-MBG
Страница 2: ...2 ...
Страница 12: ...Outdoor unit 2 Overview of the Units 12 2 1 Functional Diagrams AW6 V6 MBG AW9 V6 MBG ...
Страница 13: ...Outdoor unit 2 Overview of the Units 13 2 1 Functional Diagrams AW11 V6 MBG AW13 V6 MBG ...
Страница 81: ......