Erskine Attachments WOOD CHIPPER 9, Руководство оператора

Страница: 8 / 30

3 9" SKID STEER CHIPPERS
PN 12174
SAFETY
Keep hands and feet out of inlet and discharge
openings while machine is operating to avoid serious
personal injury. Stop and allow machine to come to a
complete stop before clearing obstructions.
P/N: 12169
1
Read and understand this owner/operators
manual. Be completely familiar with
the controls and the proper use of this
equipment.
Obtain and wear safety glasses and use
hearing protection at all times when
operating this machine.
Before inspecting or servicing any part
of this machine, shut off power source,
remove the key, disconnect spark plug wire
from spark plug and make sure all moving parts have come to a
complete stop.
P/N: 12172
2
Keep hands and feet out of inlet and
discharge openings while machine is
operating to avoid serious personal injury.
Stop and allow machine to come to a complete stop before clearing
obstructions.
P/N: 12175
5
Check blade bolts for proper torque after
every 8 hours of operation. Check blades
and rotate or resharpen daily or as required
to keep blades sharp. Refer to owners manual for instructions.
Failure to do so may cause poor performance, damage or personal
injury and will void the machine warranty.
P/N: 12250
6
Do not operate this equipment in the
vicinity of bystanders. Do not allow
children to operate this equipment. Always
stand clear of discharge area when operating this machine. Keep
face and body away from discharge areas.
P/N: 12173
3
Read and understand your owners manual before operating. If
owners manual was not included or
you have any questions, please call
800-247-7335 or 701-282-5520
(U.S.A.).
P/N: 14942-00
7
Do not operate machine without shields in place.
Failure to do so may cause serious injury or death.
P/N: 12174
4
1.6 SAFETY DECALS
The decals listed below correspond with the numbers in the Safety Decal Locations section. Familiarize yourself with all of
the safety and operating decals on the machine and the associated hazards. See the engine owner’s manual or contact the
engine manufacturer for engine safety instructions and decals.
P/N: 18287-00
8
Feed roller support must be secured in the up position prior to
servicing chipper feed area. The feed roller can fall and cause
severe bodily harm. Consult owners
manual for proper method of securing
feed roller support. Lower feed roller
before operating chipper.
P/N: 18983-00
9
Do not operate this equipment in the vicinity of bystanders. Do
not allow children to operate this equipment. Always stand clear of
discharge area when operating this machine.
Keep face and body away from discharge
areas. Rotate the discharge tube over the
hitch before towing and lock securely in
place.
P/N: 32109-00
10