Erskine Attachments WOOD CHIPPER 9, Руководство оператора

Страница: 17 / 30

12 9" SKID STEER CHIPPERS
OPERATION
4.4 PRE-OPERATION
1. Wear appropriate eye, face, and hearing protection. Wear gloves that fit tight against the wrist.
2. Lower the chipper feed table.
3. Check that the feed roller is clear of material.
4. Place the feed roller control into the “stop” position.
5. Rotate discharge chute into desired position and secure with the lock pin.
WARNING
Do not attempt to bypass the safety systems of the skid steer loader.
4.5 STARTING THE CHIPPER
Running the skid steer chipper is a one- or two-man operation. If the system mandates an operator in the driveseat, two
people are needed. The chipper engages with the hydraulics of the skid steer, as do most skid steer powered attachments.
1. Set parking brake.
2. Ensure the feed roller is in the neutral position.
3. Engage the hydraulics of the skid steer to supply power to the unit. The chipper will start to spin.
4. Place the feed roller in the operating position and bring the unit up to speed.
5. The chipper is ready to chip.
4.6 STOPPING THE CHIPPER
1. Disengage the feed roller after all material has been cleared from the chipper.
2. Slow down the engine of the skid steer to idle and after several seconds disengage the skid steer hydraulics.