Erskine Attachments LS 24, Руководство оператора

Страница: 9 / 16

9
OPERATING INSTRUCTIONS
1. With the operator in the seat of the loader, the seat
belt fastened, and the seat bar lowered (if so
equipped), start the engine.
2. Raise the attachment slightly off of the ground.
3.
Activate the loader’s auxiliary hydraulics to open
and close the splitting wedge.
4. Position the skid steer and log splitter above the
log to be split. Always split from the end of the log
along the grain.
IMPORTANT: Never split a log across the grain.
This log splitter is not designed for cross-grain
splitting, and doing so may damage the splitter.
5. With the splitting wedge in the fully open position,
lower the splitter over the log, aligning the log in
the center of the wedge track. If the log is angled
or off to one side, the split will be uneven or the
log may slip out of the splitter.
6. Close the splitting wedge to split the log.
7. Open the wedge and move on to the next log to
be split.
NOTE: The inverted log splitter can be equipped
with an optional 4-way splitter wedge. The 4-way
wedge bolts onto the splitter in place of the
standard 2-way wedge.